vintage reverb pedal EarthQuaker Devices Ghost Echo (V3) Vintage Voiced Reverb Pedal

vintage reverb pedal EarthQuaker Devices Ghost Echo (V3) Vintage Voiced Reverb PedalWant to add reverb, but not knobs, controls, and LCD screens to your rig? Look no further than the Ghost Echo, a simple, easy to use reverb that offers all the great sounds you get from vintage spring reverb units, in a small stompbox form with only 3 controls. This third gen pedal means upgraded op amps for better sonic performance, a stronger reverb signal with double the output, and a re calibrated 'Dwell' control that can reach self oscillation.

Want to add reverb, but not knobs, controls, and LCD screens to your rig?

Look no further than the Ghost Echo, a simple, easy-to-use reverb that offers all the great sounds you get from vintage spring reverb units, in a small stompbox form with only 3 controls.

This third gen pedal means upgraded op-amps for better sonic performance, a stronger reverb signal with double the output, and a re-calibrated 'Dwell' control that can reach self-oscillation. It also features updated artwork and silent, relay-based switching.

Tech Specs:

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 86 mA
Input Impedance: 10 MΩ
Output Impedance: 1 kΩ
Power: 9 volt DC (center pin negative)

(DO NOT RUN AT HIGHER VOLTAGES!)

NOTICE from builder:

This device is true bypass and uses electronic relay-based switching. Audio will NOT pass without power.

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!