capo pedal Jad & Freer Audio | CAPO | 4-in-1 Multi-Preamp, Saturator, DI & FX Loop for Bass

capo pedal Jad & Freer Audio | CAPO | 4-in-1 Multi-Preamp, Saturator, DI & FX Loop for Bass"STUDIO IN A BOX" The CAPO is a powerful preamp and D. I. capable of studio grade clean sounds, harmonic saturations and everything in between. It features four different preamps, two XLR balanced outputs and endless routing possibilities in a pedalboard friendly format. A SIDE consists of three very different preamps: a fixed gain clean preamp (unaffected by the GAIN control) is mixed with two saturator circuits via the BLEND mini knob. You can

"STUDIO-IN-A-BOX"

The CAPO is a powerful preamp and D.I. capable of studio-grade clean sounds, harmonic saturations and everything in between. It features four different preamps, two XLR balanced outputs and endless routing possibilities in a pedalboard-friendly format.

A SIDE - consists of three very different preamps: a fixed-gain clean preamp (unaffected by the GAIN control) is mixed with two saturator circuits via the BLEND mini-knob. You can control the amount of saturation using the GAIN knob and mix the J and F circuits via the STYLE knob (N position is a perfect mix of the two circuits, so you get a boost in volume too).

A three band eq helps in shaping your sound with familiar controls: a BASS control boost and cuts ±12dB @80Hz (shelving), a semi-parametric MID control boost and cuts ±9dB @100Hz10KHz (band pass) and a HIGH control boost and cuts ±12dB @4KHz (shelving). DEEP and BITE switches provide a perfectly tailored bottom-end boost and just the right enhance of string attack. LEVEL controls the output of the pedal.

B SIDE - is the fourth preamp featured in the pedal, it is controlled by dedicated GAIN and LEVEL mini-knobs. It is normally routed before the A SIDE but it can be moved after hitting the B->A A->B switch.

D.I. - the pedal has two XLR balanced outputs that work as long as the pedal is powered: DIRECT OUT is routed right after the INPUT without any processing; PREAMP OUT is routed after all the preamps, eq and loops. Ground (GND/LIFT) can be lifted from both DI outputs and phase (Ø) can be flipped from the DIRECT OUT output.

LOOP EFFECTS - The CAPO features two send/return loops: PRE is routed before the preamp but after the DIRECT OUT; POST is routed after the preamp but before the PREAMP OUT. POST loop is always active but can be linked to the A SIDE switch pushing the LINK A SIDE switch.

Unbalanced OUTPUT and balanced PREAMP OUT are affected by a selectable low pass filter (LPF) tailored to smooth out the top end when needed, even with the preamp bypassed.